Kiln ordering

15,000 BF Kiln Kit

Tue, 6 Oct 2009 00:00:00 -0500

15,000 BF Kiln Kit
Price: $28,500
Includes: Fabrication guide, user manual, kiln schedules, dry drying manual, fans, venturi, kiln duty motors, motor starters, moisture meter, automated aluminum vents, controllers, wet bulb well, hot water heating coils, unlimited consultation during fabrication and start-up.
Shipping: Included via UPS and other services to lower 48 states. USA orders only.
Heating Options (shipping not included):
(a) Gas Boiler:
(b) Wood Fired Waterstove
(c) Pallet Residue Fired Waterstove
(d) Gas Burner for Heat Pipe:
(e) Steel Heat Pipe:
(f) Capstone C30 Microturbine - 4 needed:
(natural gas/grid connect/new/surplus)
(g) Solar Hot Water Panel:

For more information on the Global Container Kiln System

Contact Us  Global Energy  P.O. Box 5617 Madison, WI 53705 USA TEL: (608) 238-6001  greg@globalmicroturbine.com

5,000 BF Kiln Kit

Mon, 5 Oct 2009 11:59:22 -0500

5,000 BF Kiln Kit
Price: $18,500 (shipping included to any lower 48 states)
Includes: Fabrication guide, user manual, kiln schedules, dry drying manual, fans, venturi, kiln duty motors, motor starters, moisture meter, automated aluminum vents, controllers, wet bulb well, hot water heating coils, unlimited consultation during fabrication and start-up.
Shipping: Included via UPS and other services to lower 48 states. USA orders only.
Heating Options (shipping not included):
(a) Gas Boiler: Wall mounted or tank boiler
(b) Wood Fired Waterstove
(c) Pallet Residue Fired Waterstove
(d) Gas Burner for Heat Pipe:
(e) Steel Heat Pipe:
(f) Capstone C30 Microturbine - 4 needed:
(natural gas/grid connect/new/surplus)
(g) Solar Hot Water Panel:

For more information on the Global Container Kiln System

Contact Us  Global Energy  P.O. Box 5617 Madison, WI 53705 USA TEL: (608) 238-6001  greg@globalmicroturbine.com

Parts

Fri, 2 Oct 2009 12:06:44 -0500

Global Container Kiln
Parts

Web bulb well: $350 (stainless steel includes extra wet bulb cloths)

Fan Assembly 1/2 HP: $1,500
(includes fan blade, venturi, kiln duty 1/2 HP motor, motor starter, thermal contacts - if ordering three phase)

Fan Assembly 1 HP: $2,500
(includes fan blade, venturi, kiln duty 1 HP motor, motor starter, thermal contacts - if ordering three phase)

Heating Coils: $2,000
(Rated at 80,000-290,000 btu each, includes coil, fan, venturi, 1/2 HP motor, motor starter)

Hot Water System Control: $1,500
(Includes controller, hot water circulation pump, pump flange - will support up to 3 heating coils)

Venting System Control: $2,000
(Includes two automated aluminum vents, wet bulb well, and controller)

Fabrication Parts: $1,500
(Includes THHN wire, thermo wire, metal fin comb, labeling tape for wiring, expansion tank)

Solar Hot Water Panel: $4,000
(Can be used to supplement primary heating system in warm weather months.)

Publications: $500
(Includes kiln drying forms, kiln drying manual, Drying Red Oak, and commercial kiln drying schedules. All pubs on DVD in .pdf format)

Circular Chart Recorder - 1 Pen: $2,500
Large Chart K-Thermocouple, Remote Sensing Temperature Recorder
• Monitor and record temperature on an easy-to-read 6" diameter chart.
• Included sensor is a flexible 4-ft. Teflon-coated bead wire, K-thermocouple probe. User selects chart rotation time (1 or 7 day) and temperature range: DegreeF/C, 0 Degree to 250 DegreeF/C. LED indicator shows power status. Include pen and 60 charts.
• Temperature accuracy: Plus or Minus0.5% of chart range ±1.8°F (1 DegreeC) recorder only
• Powered by 120V adapter with 9V battery backup
• Case measures 7 9/16H x 7 9/16W x 3 1/4"D
• Panel cut-out dimensions: 6.9H x 6.9"W (DIN compatible)
• With Alarm
• 24V/0.5A SPST normally open alarm contacts.
• SPST alarm/relay contacts have independently adjustable Min./Max. set points.)
(note: options include RS232 cable and data-logging software)

Circular Chart Recorder - 2 Pen: $2,500
Large Chart K-Thermocouple, Remote Sensing Temperature Recorder
• Monitor and record 2 temperatures on an easy-to-read 6" diameter chart.
• Included sensor is a flexible 4-ft. Teflon-coated bead wire, K-thermocouple probe. User selects chart rotation time (1 or 7 day) and temperature range: DegreeF/C, 0 Degree to 250 DegreeF/C. LED indicator shows power status. Include pen and 60 charts.
• Temperature accuracy: Plus or Minus0.5% of chart range ±1.8°F (1 DegreeC) recorder only
• Powered by 120V adapter with 9V battery backup
• Case measures 7 9/16H x 7 9/16W x 3 1/4"D
• Panel cut-out dimensions: 6.9H x 6.9"W (DIN compatible)
• With Alarm
• 24V/0.5A SPST normally open alarm contacts.
• SPST alarm/relay contacts have independently adjustable Min./Max. set points.)
(note: options include RS232 cable and data-logging software)

Circular Chart Recorder and Controller: $6,000
---------------------------------------

For more information on the Global Container Kiln System

Contact Us  Global Energy  P.O. Box 5617 Madison, WI 53705 USA TEL: (608) 238-6001  greg@globalmicroturbine.com